F 350 2WD Super Duty V10-6.8L VIN V (2005)
Piston: Service and Repair
General Procedures
Piston Inspection
Special Tool(s)
CAUTION: Do not use a caustic cleaning solution or a wire brush to clean the pistons or damage can occur.
1. Clean and inspect the (1) ring lands, (2) skirts, (3) pin bosses, and the (4) tops of the pistons. If wear marks, scores or glazing is found on the
piston skirt, check for a bent or twisted connecting rod.
2. Use the Piston Ring Groove Scraper to clean the piston ring grooves.
^
Make sure the oil ring holes are clean.
Piston-Pin to Bore Diameter