F 350 2WD Super Duty V10-6.8L VIN V (2005)
CAUTION: The filter has a bypass valve in it. The red arrow on the filter indicates the direction of the fluid flow through the filter. The filter must be
installed in the fluid cooler return line with the red arrow pointing away from the transmission fluid cooler and toward the transmission (the return line
has fluid coming out of the cooler going to the transmission). If the fluid filter is not installed correctly, it will cause internal transmission damage.
CAUTION: Do not install any rubber hoses or steel tubing with a bend entering the filter greater than 60 degrees.
4. Using a suitable length of hose, install the filter. Tighten the clamps.
5. Position back the lower splash shield between the filter and lower radiator core support. Install the pushpin.
6. Clean a visible section of the transmission fluid pan and install the sticker.
7. Fill the transmission with clean automatic transmission fluid to the specified level.
-
Verify correct operation.
-
Check the filter for leaks.
