F 350 2WD Super Duty V10-6.8L VIN V (2005)
Seat Belt Buckle: Service and Repair
Safety Belt Buckle - Front, 40/20/40 Seat, Driver and Passenger
SAFETY BELT BUCKLE - FRONT, 40/20/40 SEAT, DRIVER AND PASSENGER
Removal
All vehicles
1. Remove the affected seat.
Driver safety belt buckle
2. Disconnect the safety belt warning switch electrical connector.
-
Remove the pin-type retainer from the safety belt warning switch electrical connector.
All vehicles
3. NOTE: Driver side shown, passenger side similar.
Remove the safety belt buckle.
1
Remove the safety belt buckle nut.
2
Remove the safety belt buckle.
Driver safety belt buckle
4. Remove the front inboard track-to-seat pan bolt.
5. Loosen the rear inboard track-to-seat pan bolt to allow the removal of the electrical connector.