F 350 2WD Super Duty V10-6.8L VIN V (2005)
All seats
1. NOTE: When tightening the safety belt buckle retaining nut, make sure that the seat backrest pivot bolt does not turn with the nut.
Position the safety belt buckle to the seat and install the nut.
-
Route the safety belt buckle usage detection switch wire harness as noted in removal.
Driver seat
2. Install the safety belt buckle usage detection switch electrical connector to the seat cushion pan.
All seats
3. Install the seat on the side with the affected safety belt buckle.
4. Check the active restraint system for correct operation.