F 350 2WD Super Duty V10-6.8L VIN V (2005)
7. Remove the seat backrest trim panel.
1
Using a pin-type retainer removal tool, release the two pin-type retainers at the bottom of the seat backrest trim panel (see inset for location).
2
Push the sides of the seat backrest trim panel together and release the retaining clips (see inset for location).
3
Slide the seat backrest trim panel down, releasing the upper retainers and remove the seat backrest trim panel.
8. Release the seat backrest trim cover J-clips.
9. NOTE: The inboard and outboard tower cap covers are not interchangeable.
Remove the inboard, outboard and front tower cap screw covers. Remove four tower cap attachment screws.