F 350 2WD Super Duty V10-6.8L VIN V (2005)
Seat Belt Retractor: Service and Repair
Front Safety Belt Retractor - Without Seat Integrated Restraints (SIR)
FRONT SAFETY BELT RETRACTOR - WITHOUT SEAT INTEGRATED RESTRAINTS (SIR)
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal
NOTE: Driver side shown, passenger side similar.
Regular cab vehicles
1. Using the special tool, remove the bolt. Remove the safety belt anchor.
2. NOTE: Inspect the shoulder safety belt guide cover for damage. If the shoulder safety belt guide cover is damaged or the cover does not remain
closed, install a new shoulder safety belt guide cover.
Remove the driver side shoulder safety belt guide.
1
Open the cover.
2
Remove the nut.
3
Remove the shoulder safety belt guide.
3. Remove the driver side door scuff plate and rear corner trim panel.