F 350 2WD Super Duty V10-6.8L VIN V (2005)
Axle Beam: Service and Repair
Axle - F-250, F-350
Special Tool(s)
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a replacement
part of lesser quality or substitute design. Torque values must be used during reassembly to ensure proper retention of these parts.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the wheel and tire assembly.
3. Remove the front disc brake caliper, front disc brake hub and brake disc and front brake disc shield.
4. If equipped, remove the front disc brake ABS sensor retainer bolt and the ABS sensor harness bracket bolt from the front wheel spindle. Position
the ABS sensor aside.
5. Remove the cotter pin and the castellated nut from the tie rod end. Discard the cotter pin.