F 350 2WD Super Duty V10-6.8L VIN V (2005)
CAUTION: Whenever the transmission has been serviced or a remanufactured transmission has been installed, the transmission fluid cooler, cooler
lines and the remote filter manifold must be cleaned and backflushed to remove any contaminants or transmission failure will occur.
NOTE: Install a new oil-to-air (OTA) cooler as part of a transmission overhaul, or when installing a remanufactured transmission.
NOTE: This transmission is equipped with a remote transmission fluid filter. When carrying out an overhaul or installing a remanufactured transmission
a new filter element must be installed.
1. Using a suitable torque converter/fluid cooler cleaner, flush the transmission fluid cooler and lines.
2. If equipped, remove and discard the transmission fluid in-line filter.
3. Remove the remote filter element.
