F 350 2WD Super Duty V10-6.8L VIN V (2005)
Universal Joint: Service and Repair
Driveshaft Universal Joint - Single Cardan, Flange Yoke
Driveshaft Universal Joint - Single Cardan, Flange Yoke
Disassembly
Initial disassembly
1. CAUTION: Do not, under any circumstance, clamp the driveshaft in the jaws of a vise or similar holding fixture.Denting or localizing fracture
can result, causing driveshaft failure during vehicle operation.
Place the driveshaft on a suitable workbench. Do not damage the tube.
2. Index-mark the driveshaft components.
3. Remove and discard the 4 snap rings.
4. Clamp the C-Frame and Screw Installer/Remover in a vise.