F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
Front Door Window Motor: Service and Repair
Front Door Window Regulator and Motor
FRONT DOOR WINDOW REGULATOR AND MOTOR
Removal and Installation
With power windows
1. Remove the window control switch.
With manual windows
2. Remove the window crank handle.
1
Position the window crank handle cover aside.
2
Remove the window crank handle retaining screw and the window crank handle.
All vehicles
3. Remove the door trim panel.
4. Remove the door speaker.
5. NOTE: Do not remove the window glass from the door.
Remove the window glass from the window regulator.
6. Tape the window glass in the full UP position.
7. Disconnect the window motor electrical connector (power windows only).