F 350 2WD Super Duty V8-5.4L VIN 5 (2006)
Water Pump: Service and Repair
Coolant Pump - Gasoline Engines
Material
Removal and Installation
1. Drain the engine cooling system.
2. Remove the cooling fan.
3. Remove the accessory drive belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.
4. Remove the 4 bolts and the coolant pump pulley.
^
To install, tighten to 25 Nm (18 ft. lbs.).
5. Remove the 4 bolts and the coolant pump. Discard the O-ring seal.
^
Inspect the mating surfaces. Clean the sealing surfaces with metal surface prep.
^
Install a new O-ring seal. Lubricate the O-ring seal with clean engine coolant prior to installation.