F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
-
piston seals
-
cylinder bores
2. Install the caliper pistons.
1
Install the piston seals.
2
Install the dust boots.
3
CAUTION: Be careful not to damage or dislodge the piston seal.
Insert the caliper pistons.
4
Press the caliper pistons into the cylinder bore being careful not to cock the caliper pistons.
3. Install the rear disc brake caliper.
Brake Caliper Anchor Plate
Brake Caliper Anchor Plate
Removal
1. Remove the brake pads.
2. NOTE: Forward-of-axle rear disc brake caliper anchor plates are mounted using stud bolts.
Remove the bolts and the rear disc brake caliper anchor plate.
Installation
F-250/350
1. Position the rear disc brake caliper anchor plate. Install the bolts.