F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Rocker Arm Assembly: Service and Repair
Rocker Arm Cover, Rocker Arm and Push Rod
Material
Removal
1. CAUTION: To prevent engine damage, always install new head bolts when installing the cylinder head, even if removing only one bolt. It will be
necessary to install a new cylinder head gasket as well as all cylinder head bolts.
Remove the cylinder head.
2. NOTE: Be careful when removing the rocker arm. Do not lose the rocker arm steel ball.
Push down on the rocker arm. Pull out on the bottom releasing the ball.
3. Remove the steel ball from the rocker arm.
4. Remove the rocker arm clip from the fulcrum plate.
5. Clean and inspect all parts for pitting or scuffing. Install new rocker arm and valve bridges, as needed.