F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
![background image](/ford/f_350_2wd_super_duty/v8-6.0l_dsl_turbo_vin_p/Page-859003.png)
8. NOTE: Late build shown, early build similar.
Remove the fuel injector control module mounting bracket.
9. NOTE: Early build shown, late build similar.
Disconnect the glow plug connector and retainer.
10. Remove the nut and position the oil level indicator and tube aside.
11. CAUTION: To prevent engine damage, do not use air powered tools when installing the valve cover.
NOTE: Mark the position of the valve cover bolts for valve cover bolt installation.
NOTE: Early build shown, late build similar.
Remove the eleven bolts and the valve cover. Clean and inspect the valve cover gasket, and install a new gasket if necessary.