F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Fuel Pressure Sensor/Switch: Service and Repair
Injection Control Pressure (ICP) Sensor - Early Build
INJECTION CONTROL PRESSURE (ICP) SENSOR - EARLY BUILD
REMOVAL
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
Vehicles with automatic transmission
2. Remove the transmission fluid level indicator.
3. Remove the retaining nut and disconnect the transmission fluid fill tube from the stub tube and position it aside.
All vehicles
4. Raise the vehicle.
5. Remove the bolts and the turbocharger heat shield.
6. NOTE: It will be necessary to position the heat wrap aside.
Disconnect the injection control pressure (ICP) sensor electrical connector.