F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Fuel Pressure Sensor/Switch: Service and Repair
Injection Control Pressure (ICP) Sensor - Late Build
INJECTION CONTROL PRESSURE (ICP) SENSOR - LATE BUILD
REMOVAL
1. NOTE: The injection control pressure (ICP) sensor is located in the RH valve cover.
Disconnect the ICP sensor electrical connector.
2. Remove the ICP sensor.
INSTALLATION
1. To install, reverse the removal procedure.
-
Verify the sensor O-ring seal is in place.