F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
2. Through the glove box opening, remove the passenger air bag module retaining nuts and bolts.
3. Remove the passenger air bag module.
1
Using a 3/8-inch x 4-inch flat head screwdriver, or equivalent, carefully slide the head of the screwdriver under the right bottom edge of the
door and lift upward, separating the door from the clip. Separate the rest of the door from the clips by lifting the door with your hands.
2
Remove the passenger air bag module.
INSTALLATION
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions and notes at the beginning of the removal
procedure.
1. Disconnect the battery ground cable and wait at least one minute.
2. Position the passenger air bag module into the instrument panel. Install the passenger air bag module retaining nuts and bolts.
3. Install the passenger air bag module door.