F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
2
Push the sides of the seat backrest trim panel together, align the retaining clips to the seat backrest frame wires and release the cover, engaging
the retaining clips into the seat backrest frame wire retainer.
3
Install the seat backrest trim panel pin-type retainers.
9. Position the side trim cover onto the seat.
-
Vehicles with power seat, feed the seat control switch wire harness through the seat opening as noted in removal.
-
Align the side shield to the pivot bolt.
Vehicles with heated seat
10. Connect the heated seat switch electrical connector.
All seats
11. Position the lumbar adjuster control. Install the two screws securing the lumbar adjuster control to the seat track riser.