F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Key Reminder Switch: Service and Repair
SWITCH - KEY-IN-IGNITION WARNING
REMOVAL
1. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
2. Remove the key-in-ignition warning switch.
1
Pry the clip downward.
2
Release the key-in-ignition warning switch from the rear of the ignition switch lock cylinder.
INSTALLATION
1. To install, reverse the removal procedure.
-
Verify the ignition switch lock cylinder operation.