F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Suspension Strut / Shock Absorber: Service and Repair
Shock Absorber
Shock Absorber - F-250, F-350, Excursion
Removal
WARNING: All vehicles are equipped with gas-pressurized shock absorbers which will extend unassisted. Do not apply heat or flame to the
shock absorbers during removal or component servicing.
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. They must be replaced with the same part number or an equivalent part if replacement is necessary. Do not use a replacement
part of lesser quality or substitute design. Torque values must be used as specified during reassembly to ensure proper retention of these parts.
1. Raise the hood and remove the upper shock absorber retaining nut and upper shock absorber insulator.
2. Raise and support the vehicle.
3. Remove the lower shock absorber retaining nut and remove the shock absorber.
Installation