F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
![background image](/ford/f_350_2wd_super_duty/v8-6.0l_dsl_turbo_vin_p/Page-1960010.png)
24. Using a small drift, drive out the differential pinion shaft lock pin.
25. Using a drift, remove the differential pinion shaft.
26. To remove the differential side gears and the differential pinion gears, rotate the differential side gears. The differential pinion gears will turn to
the opening in the differential case.
27. Remove the differential pinion gears and the differential pinion thrust washers behind the differential pinion gears.
28. Lift out the differential side gears and the differential side gear thrust washers.
Assembly
1. NOTE: For Truetrac and Trac-Lok differential assemblies, proceed to Step 7.
NOTE: Use a vice with brass jaws or wood blocks.
Place the differential in a vise.
2. Lubricate and assembly both differential side gears and differential side gear thrust washers. Lubricate and assemble the differential pinion gears
and the differential pinion gear thrust washers.