F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
18. CAUTION: Always install new pinion bearings when installing new bearing cups.
NOTE: If the feeler gauge can fit between a cup and the bottom of its bore at any point around the cup, remove and reseat the cup.
Check that the cups have seated correctly in their bores.
19. CAUTION: If any of the gauge surfaces have nicks in them, remove the high spots with a medium India oilstone to prevent erroneous readings.
NOTE: Apply a light oil film on the pinion bearings before assembling the tools.
Assemble and position the following in the differential housing.
1
Position the special tool.
2
Position the special tool.
3
Position the inner pinion bearing.
4
Position the special tool.
5
Position the special tool.
6
Position the outer pinion bearing.
7
Thread on the special tool.
