F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Slip Yoke: Service and Repair
Driveshaft Slip Yoke
Special Tool(s)
Material
Disassembly
1. CAUTION: Do not clamp the driveshaft in the jaws of a vice or a similar holding fixture.
Place the driveshaft on a suitable workbench.
2. Index-mark the driveshaft slip yoke and the stub shaft.
3. Remove the driveshaft slip yoke.
1
Cut and discard the driveshaft slip yoke boot clamps.
2
Separate the driveshaft slip yoke from the stub shaft.
