F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
19. Position the bearing cup on the spider trunion in the centering flange yoke.
20. Using the special tool, press the bearing cup into position.
21. CAUTION: The assembly requires centering to install the final bearing cup, due to spring pressure.
NOTE: Position the jaws of the special tool into the driveshaft center yoke bearing cup bores.
With the special tools in position, hand-tighten the Differential Bearing Remover to center the spider trunion in the bore.
22. Using the special tool, install the final bearing cup.
^
Remove the special tools.