F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
4. Remove the rear wheels using a wheel dolly.
5. Release the parking brake cable tension, and disconnect the cables at the equalizer and the anchor plate.
6. Remove the frame anchors, and position the parking brake cables aside.
7. Disconnect the rear anti-lock brake sensor electrical connector. Release the harness clips and position the harness aside.
8. NOTE: To maintain driveline balance, mark the driveshaft components so they can be reinstalled in their original positions.
Disconnect the driveshaft, and position it aside.