F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
![background image](/ford/f_350_2wd_super_duty/v8-6.0l_dsl_turbo_vin_p/Page-1970017.png)
Assemble and position the following in the differential housing.
1
Position the screw (adapter for 205-SI56).
2
Position the Alignment Adapter.
3
Position the inner pinion bearing.
4
Position the Drive Pinion Depth Gauge/Aligner.
5
Position the Gauge Block (adapter for 205-SI56).
6
Position the outer pinion bearing.
7
Thread on the Drive Pinion Depth Gauge/Aligner (Handle).
9. NOTE: This step simulates pinion bearing preload.
Using a Nm (inch-pound) torque wrench, tighten the Handle to the specification.