F 350 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
6. Install the RH crossmember bolts.
7. Install the bracket and loosely install the bolts.
8. Tighten the RH crossmember bolts.
9. Tighten the transmission insulator and retainer nuts.
10. Install the wire harness and install the two retaining clips to the rear of the crossmember.
Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) Sensor
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer Maintenance/Service and Repair.