F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
12. Disconnect the PCM electrical connector and wire retainer.
13. Remove the 3 pushnuts and the glow plug module heat shield.
-
Discard the pushnuts.
14. Disconnect the glow plug module electrical connectors.
-
Position the glow plug electrical connectors out from under the cowl.
15. Remove the 2 nuts and glow plug module.
16. Disconnect the Exhaust Gas Recirculation Temperature (EGRT) sensor electrical connector from the glow plug bracket.
17. Remove the EGR-Oxidation Catalytic Converter (OC) pipe from the vehicle.
