F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
10. Install the upper cooling fan shroud.
11. Install the ACL assembly.
12. Connect the retaining clip for the power steering cooler tube at the frame.
13. Install new body bolts.
-
Tighten to 90 Nm (66 lb-ft).
14. NOTE: RH side shown, LH side similar.
If equipped, install the running boards and 18 bolts.
-
Tighten to 13 Nm (115 lb-in).
15. Connect the retaining clip for the transmission cooler tubes at the frame.
16. Position back the ground strap and install the bolt.
-
Tighten to 25 Nm (18 lb-ft).
17. Position back the transmission cooler tubes on the stud and install the nut.
-
Tighten to 9 Nm (80 lb-in).