F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
14. Disconnect the Exhaust Gas Recirculation Temperature (EGRT) sensor electrical connector from the glow plug bracket.
15. Remove the EGR-Oxidation Catalytic Converter (OC) pipe from the vehicle.
16. NOTE: Engine removed from the vehicle for clarity.
Remove the bolt and the 5 retaining nuts for the high-pressure fuel injection pump heat shield. Remove the fuel tube bracket and position the
ground strap.
17. NOTE: High-pressure fuel injection pump heat shield removed for clarity.
Remove the remaining 2 bolts and the high-pressure fuel injection pump heat shield.
18. Remove the RH turbocharger inlet pipe.