F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
6. Position back the ground cable and install the bolt.
-
Tighten to 47 Nm (35 lb-ft).
7. Loosely install the 2 exhaust downpipe bolts.
8. NOTICE: Only use hand tools when installing the transmission mount retaining nuts or damage to the transmission mount may occur.
Remove and discard the 2 transmission mount retaining nuts. Install the 2 new transmission mount retaining nuts.
-
Tighten to 115 Nm (85 lb-ft).
9. NOTICE: Only use hand tools when installing the engine mount retaining nuts or damage to the engine mount may occur.
Install the 3 new LH engine mount retaining nuts.
-
Tighten to 200 Nm (148 lb-ft).
10. Install the 2 new upper studs for the RH engine mount.
-
Tighten to 80 Nm (59 lb-ft).