F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
1. Relieve the fuel pressure. For additional information, refer to Fuel System Pressure Release - Gasoline Engines See: Fuel Filter/Fuel Pressure
Release/Service and Repair/Fuel System Pressure Release or Fuel System Pressure Release - Diesel Engine See: Fuel Filter/Fuel Pressure
Release/Service and Repair/Fuel System Pressure Release.
2. Disconnect the battery ground cable.
3. Remove the fuel tube safety clip.
4. Install the Spring Lock Coupling Disconnect Tool.
5. Close and push the Spring Lock Coupling Disconnect Tool into the open side of the cage.
6. Separate the spring lock coupling.
Connect - Type I
1. NOTE: Apply clean engine oil to the O-ring seals.
Inspect and clean both spring lock coupling ends. Install new O-ring seals and garter springs if necessary.
2. NOTE: Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the tube.