F 350 2WD Super Duty V8-6.4L DSL Turbo (2009)
13. Tighten the 2 RH turbocharger inlet pipe-to-EGR-OC bolts.
-
Tighten to 31 Nm (23 lb-ft).
14. Tighten the 2 EGR-OC-to-turbocharger bracket bolts.
-
Tighten to 31 Nm (23 lb-ft).
15. NOTICE: Failure to install and correctly tighten the Exhaust Gas Recirculation (EGR)-Oxidation Catalytic Converter (OC) pipe bracket
bolt will result in damage to the horizontal EGR cooler and possible engine damage.
Tighten the EGR-OC bracket-to-cylinder head bracket bolt.
-
Tighten to 31 Nm (23 lb-ft).
16. NOTICE: Failure to install and correctly tighten the Exhaust Gas Recirculation (EGR)-Oxidation Catalytic Converter (OC) pipe bracket
bolt will result in damage to the horizontal EGR cooler and possible engine damage.
Tighten the cylinder head bracket-to-cylinder head bolt.
-
Tighten to 62 Nm (46 lb-ft).
17. Install the EP sensor tube fitting.
-
Tighten to 20 Nm (177 lb-in).
