F 350 2WD Super Duty V8-6.7L DSL Turbo (2011)
Sound Proofing / Insulation: Description and Operation
Sound Deadeners and Insulators
NOTICE:
-
Mastic is made of a combustible material and should be removed prior to carrying out welding procedures to the area. Heat zones from
welding near the mastic can cause the mastic material to burn.
-
Corrosion protection must be restored to the area AFTER the mastic material is applied. Corrosion protection products may be wax
based and loss of adhesion may occur.
NOTE:
-
The following illustrations serve as a reference to indicate mastic patch (butyl pad) locations. Additional insulators and sound deadeners are used
beyond those indicated in the illustration.
-
To restore the vehicle to design intent, missing or damaged sound deadeners and insulators should be replaced with the correct service replacement
component.
Regular Cab
NOTE: Body mastic insulators (butyl pad) use the same base part number (25310A60) except as indicated in door applications.
Sound Deadeners and Insulators - Regular Cab
SuperCab
NOTE: Body mastic insulators (butyl pad) use the same base part number (25310A60) except as indicated in door applications.
