ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Right Side|Page 2179 > < Valve Cover|Specifications
Page 1
background image

Valve Cover: Service and Repair
Right Side

Removal 

1. Disconnect both battery ground cables.
2. Remove the charge air cooler inlet tube.

3. Remove the oil level indicator tube.

1. Remove the nut.
2. Pull upward and remove the tube.

4. Disconnect the fuel injector/glow plug jumper nine pin electrical connector.

1. Disconnect the retaining clip.
2. Disconnect the nine pin connector.

5. Remove the valve cover.

1. Remove the ten bolts.
2. Remove the valve cover.

Right Side|Page 2179 > < Valve Cover|Specifications