F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
5. Remove the canister vent solenoid from the evaporative emissions canister if equipped.
6. Remove the evaporative emission canister elbow
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE: Lubricate all evaporative emission O-rings with MerPol meeting Ford specification ESE-M99B 144-B or equivalent.
2. Perform the Evaporative Emission System Leak Test. See: Testing and Inspection/Component Tests and General Diagnostics/Evaporative
Emission Canister Assembly Leak Test
3. Perform the Evaporative Emission Running Loss Verification Drive Cycle. See: Computers and Control Systems/Testing and
Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
