F 350 2WD Super Duty V8-7.3L DSL Turbo VIN F (1999)
Windshield: Service and Repair
SPECIAL TOOLS RECOMMENDED
REMOVAL
1. Remove the antenna.
2. Remove the windshield wiper arms.
3. Remove the cowl vent panels.
4. Remove the inside rear view mirror.
5. Remove the A-pillar mouldings.
6. Lower the front portion of the roof trim panel.
7. Lubricate the urethane sealant with water to aid the Interior Glass Cut-Out Knife Kit when cutting the urethane sealant.
8. Insert the Interior Glass Cut-Out Knife into the urethane sealant at the upper center of the vehicle interior and work toward the bottom corners.
WARNING: To prevent glass splinters from entering the eyes or cutting the hands, wear safety glasses and heavy gloves when cutting the glass
from the vehicle.
CAUTION: To prevent damage to the windshield header seal, turn the blade so that the flat side is against the pinch weld.
NOTE: Support the windshield glass to prevent the glass from dropping before cuffing the bottom edge of the urethane sealant.
