F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Vacuum Reservoir HVAC: Service and Repair
REMOVAL
1. Disconnect A/C plenum vacuum harness from A/C vacuum reservoir tank and bracket, located in the engine compartment above the right wheel.
2. Working from outside of the engine compartment, remove two nuts from wheel well housing (above tire).
3. Remove A/C vacuum reservoir tank and bracket from vehicle.
INSTALLATION
1. Place A/C vacuum reservoir tank and bracket in its location inside the engine compartment.
2. Working from outside the engine compartment (above tire), install two nuts retaining A/C vacuum reservoir tank and bracket to vehicle.
3. Connect A/C plenum vacuum harness to A/C vacuum reservoir tank and bracket.
4. Check system for proper operation.
