F 350 4WD Pickup V8-351 5.8L VIN H EFI (1997)
Volt Meter Gauge: Service and Repair
Removal
1. Remove instrument cluster from instrument panel.
2. Remove screws attaching the instrument cluster main lens and instrument cluster mask to instrument cluster backplate.
3. Remove instrument cluster main lens and instrument cluster mask.
4. Remove the battery voltage gauge from instrument cluster backplate by grasping the outside edges of gauge and lifting.
NOTE: The battery voltage gauge is attached to the instrument cluster backplate by retaining clips.
Installation
1. Follow removal procedure in reverse order.
2. When installing the battery voltage gauge, make sure pins are properly seated into the instrument cluster backplate retaining clips.
3. Check system operation.
