F 350 4WD Pickup V8-7.3L DSL (1988)
Engine Mount: Service and Repair
Front
Fig. 4 Engine Mounts
Fig. 5 Engine Mounts
1.
Disconnect battery ground cables.
2.
Remove fan shroud halves.
3.
Raise and support vehicle.
4.
Remove mount to crossmember attaching nuts, Figs. 4 and 5.
5.
Disconnect muffler inlet pipes at exhaust manifolds.
6.
Remove engine mount to block attaching bolts.
7.
Lower vehicle.
8.
Install suitable engine lifting equipment.
9.
Lift engine enough to remove mounts and brackets.
10.
Reverse procedure to install.
