F 350 4WD Pickup V8-7.3L DSL (1988)
Figure 17
CAMBER OF 0 +/- 1/2~ AS VEHICLE IS OPERATED IS OPTIMUM
1.
For vehicles with constant load (utility bodies) - Set camber to 0 +/- 1/2~. Refer to Figures 16 and 17.
2.
For vehicles with varying loads (wreckers, dumps, rollback tilts, stake racks, etc.), proceed as follows:
a.
Have the customer measure fender to ground heights, at wheel centerline with vehicle empty and loaded.
b.
Measure the front end alignment..
^
Caster
^
Camber