Automatic Locking Wheel Hub Repair for F 350 4WD Pickup - Service & Repair
Wheel Hub (Locking): Service and Repair
With Automatic Hubs
Automatic Locking Hub (Warner)
REMOVAL
1. To remove hub, first separate cap assembly from body assembly by removing the five capscrews from the cap assembly.
2. Remove cap assembly.
CAUTION: Do not drop spring, ball bearing, bearing race or retainer.
3. Remove rubber seal.
4. Remove seal bridge retainer (small metal stamping) from retainer ring space.
5. Remove retainer ring by closing the ends with needle nose pliers while pulling hub lock from wheel hub.
CLEANING and INSPECTION
Bearing Over Inner Race Installation
