F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Crankshaft Main Bearing Seal: Service and Repair
REMOVAL
1. Remove the transmission. Remove the flywheel.
2. Remove the five crankshaft rear oil seal retaining bolts and the crankshaft rear oil seal (6701).
3. Clean the crankshaft rear oil seal sealing surfaces.
4. Inspect the crankshaft rear oil seal and wear sleeve for damage. replace as necessary.
Wear Ring Remover
5. Using Crankshaft Rear Wear Ring Remover T94T-6701-AH1, Forcing Screw T84T-7025-B. Remover Tube T77J-7025-B and Crankshaft Rear
Wear Ring Remover Sleeve T94T-6701-AH21 remove the crankshaft rear wear ring.
INSTALLATION
1. Apply Silicone Rubber D6AZ-19562-BA or equivalent meeting Ford specification ESE-M4G195-A or ESE-M4G92-A to the rear oil seal
retaining ring and five crankshaft rear oil seal retaining bolts.