F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Installation
1. Lubricate the O-rings on the A/C Evaporator cor orifice liberally with clean refrigerant oil.
2. Place the orifice in the remover/replacer tool and insert into the evaporator tube until the orifice is seated at the stop.
3. Remove the tool from the orifice.
4. After checking the condenser to evaporator tube coupling end for a missing or damaged spring, install two new O-rings lubricated with clean
refrigerant oil onto the male fitting. Insert the male fitting into the inlet tube until the spring lock coupling is fully engaged.
5. Leak test, evacuate and charge system.
6. Check system for proper operation.