F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Wiper Switch: Service and Repair
NOTE: On models with tilt column, unscrew the tilt lever and remove.
REMOVAL AND INSTALLATION
1. Remove steering column shroud.
2. Remove switch to steering column tube casting attaching screws, then disengage switch from column.
3. Disconnect switch electrical connectors.
NOTE: Do not damage PRNDL cable.
4. Remove switch assembly.
5. Reverse procedure to install. Torque switch attaching screws to 18-27 inch lbs.
