F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
7.
Install the outer locknut and tighten to 217-278 Nm (160-205 ft-lb) using spanner locknut wrench.
8.
Check the final end play ofthe spindle. It should be 0.00-0.11mm (0.000-0.004 inch).
9.
Torque required to rotate the hub and rotor assembly is not to exceed 2.3 Nm (20 in-lb).
10. Install the hub locks. See: Wheel Hub (Locking)/Service and Repair