F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
2
Use the appropriate press to install the differential bearing.
^
Repeat the procedure for the other differential bearing.
NOTE: Press against the differential bearing inner cone only.
30. Install the differential case in the housing without the ring gear.
1
Position the differential case.
2
Install the bearing caps.
3
Install the bearing cap bolts.
31. Position the Dial Indicator with Bracketry.
1
Rotate the differential case to ensure differential bearings are properly seated.
2
Position the Dial Indicator with Bracketry.
32. Recheck runout with the new differential case and differential bearings.
1
Rotate the differential case.
2
Recheck and note the differential case runout.
NOTE: See the specifications for maximum differential case runout. If runout is now within specification, use new differential bearings for
assembly. If runout is still excessive, the differential case is damaged and should be replaced.