F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
Axle Shaft Snap Ring
3.
Remove the lock ring seated in the groove of the front disc brake hub and rotor.
Lockring Removal -- Manual Locking Hub
4.
Remove the body assembly from the front disc brake hub and rotor. If the body is difficult to remove, install two capscrews and pull the body
assembly out of the front disc brake hub and rotor.
Hub Body Assembly Removal
For installation, follow removal procedures in reverse order. Tighten six Torx head capscrews to 4-6 Nm (35-53 in-lb).
Do not pack the cap with grease. Excessive grease can cause excessive dialing effort.