F 350 4WD Super Duty V10-6.8L (2002)
Balance Shaft Bearing: Specifications
Balancer shaft bearing cap bolts and studs
89 inch lbs.
Valve cover bolts
89 inch lbs.
Camshaft bearing cap bolts
71-106 inch lbs.
Cylinder head temperature sensor (CHT)
18-20 ft. lbs.
Camshaft position sensor bolt
71-106 inch lbs.
Crankshaft position sensor bolt
71-106 inch lbs.
Connecting rod bolts
Stage 1
32 ft. lbs.
Stage 2
90° to 120°
Crankshaft damper pulley bolt
Stage 1
66 ft. lbs.
Stage 2
Loosen 360°
Stage 3
37 ft. lbs.
Stage 4
90°
Crankshaft main bearing bolts (cross mounted)
Stage 1
30 ft. lbs.
Stage 2
85° to 95°
Crankshaft main bearing bolts (vertical)
Stage 1
22 ft. lbs.
Stage 2
85° to 95°
Cylinder heads bolts
Stage 1
27 - 32 ft. lbs.
Stage 2
85° to 95°
Stage 3
85° to 95°
Exhaust manifold nuts
17-20 ft. lbs.
Exhaust manifold studs
89-115 inch lbs.
Drive belt idler pulley bolt
15-22 ft. lbs.
Flexplate bolts
54-64 ft. lbs.
Engine front cover bolts (1-7)
15-22 ft. lbs.
Engine front cover bolts (6-15)
30-40 ft. lbs.
Fuel injection supply manifold bracket bolts
89 inch lbs.
Heater return tube studs
30-41 ft. lbs.
Ignition coil
45-61 inch lbs.
Knock sensor bolt
15 ft. lbs.