F 350 4WD Super Duty V10-6.8L (2002)
![background image](/ford/f_350_4wd_super_duty/v10-6.8l/Page-778002.png)
5. Remove the eight pin-type retainers and the sight shield.
6. Disconnect the condenser-to-evaporator line from the A/C condenser core and remove the line.
INSTALLATION
1. To install, reverse the removal procedure.
^
Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
Condenser To Evaporator Line - Without Aux Climate Control
REMOVAL
1. Recover the refrigerant. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant Discharging and Recovery Procedure,
See: Heating and Air Conditioning/Service and Repair/Refrigerant Discharging and Recovery Procedure
2. Remove the tube clamp.